How to Replace a Saab 9-3 Key

The Saab 9-3 is a fantastic car that provides a lot of driver appeal. It has good visibility and an impressive performance engine. It also has a high safety rating.

It is important that you have two keys that work for your vehicle. If you lose the only key, it could be very expensive to add the new one.

How to replace the ignition Key on the Saab 9-3

You have to replace the car key if it won't turn. This guide will walk you through how to do it on the Saab 9-3. You will need to replace the key, get an additional reprogrammable cell and then purchase a new casing for your key-fob.

Contrary to earlier models, modern Saab cars have a transponder in the key-fob instead physical key to unlock and start the car. The issue with this is that the reprogrammable battery inside the key-fob will wear out and won't hold a charge anymore. This is especially true if you keep using the same key in the same lock.

A professional locksmith can change the battery quickly. You can also do it yourself if you have the necessary tools and a little bit of patience. The first step is to separate the key-fob. This is done by inserting a flathead screwdriver into the slot located in the middle of the case. You will need to work slowly, since the plastic is thin and can be damaged easily.

Once the case is opened then you can prepare the new key by combining the lower half of the key that was used previously with the banana and transponder on the new key. This will ensure that the new key is linked to the CIM correctly, which could make all the difference when replacing the original key for your Saab 9-3.

how to program saab 9-3 key fob to replace the ignition Key on the Saab 900

If you don't have two keys, you will need remove the steering wheel and dashboard to access the ignition. Start by disconnecting your negative battery cable. Once the battery is disconnected, it is possible to remove the trim and dashboard pieces that surround the steering wheel. Once the dash is removed, you can insert a screwdriver through the opening on the back of the ignition switch and pull it out.

The ignition cylinder is equipped with a key lock that could stop the vehicle from starting if key isn't there. If your 900's ignition switch isn't functioning, check the key to see if it's in the lock or is stuck in the ignition barrel. You should also rotate your keys and keep them clean to avoid being bent.

saab 9-3 Key fob programming cars differ from other cars in the sense that they don't use traditional keys made of metal. The car instead recognizes the electric signals generated by the key fob through the use of a special microchip.

If you lose your only working key fob, the dealer will charge you the most expensive dollar for the replacement key for saab 93 of your computer module (known as the CIM). But we can reprogram your existing computer EEPROM and prepare it to accept new keys without replacing it. This will save you over 50% of what the dealer charges! This is the SAAB KEY PROGRAM. Find out more information about it here!

How to replace the ignition Key in the Saab9-5

The metal portion of a classic Saab key is easy to copy, and also not much of a deterrent against theft of vehicles. The electronic component of the key-fob has an electronic chip that detects the car when the key is inserted in the ignition switch.

Saab's anti-theft system has relied upon this technology for over a decade. It's not as secure as an actual lock on the door, but it does make the process of stealing your vehicle harder. Every Saab owner should keep a spare Saab key in their vehicle.

The majority of new Saabs come with two keys at the factory, however you can upgrade them at the dealer with a handheld computer referred to as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is the NG 9-3 models, with more modern, newer features that require the use of a key-fob.

The dealer will replace the CIM or TWICE module on those cars if keys are lost, and charge you a premium for the process. However, we can reprogram the EEPROM on your computer and prepare it to accept new keys, and not replace the expensive modules.

How to Replace the Ignition Key in an XC90 saab 93 key fob replacement

It's probably time to replace your SAAB key fob if you are having trouble turning the barrel of your lock. Fortunately, the process is fairly simple and doesn't require you to visit an agent. Instead, you can do it yourself at home with a few simple tools.

First, you'll need to prepare the new key. Before you begin, disable the anti-theft system by placing blocks under the rear wheels and activating your handbrake. Then, you can insert the key into the ignition and move it to the on position, which activates the accessories, but it doesn't start the engine. Repeat this process five times, and then leave the key in the on position.

You'll then need to purchase a new case for your key fob. They can be found at a variety of auto parts stores and are usually extremely affordable. You can purchase them without electronics, based on the model.

To open the case simply push the screwdriver with a flathead into the slot in the middle. The case will split easily, and once you do, you'll have access to the internal electronics. Use a flathead screwdriver to gently pull out the electronic components.